48-L185B
KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
56-635
AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
52-3665
AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
47-L171N
ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
47-L171B
ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
47-L170Y
ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
50-N140B
AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
48-L185T
AKLMNPST
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
N: Acetic Acid 99%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
KLMPST
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
M: Nitric Acid 65%
P: Hydrogen Peroxide 30%
S: Hydrogen Fluoride 40%
T: Formaldehyde 37%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
48-L185P
AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
48-L212Y
ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
47-L442
AKL
A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
AJKL
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
50-N110G
ABK
A: Methanol
B: Acetone
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.
AJK
A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Performance Level is ranked from 6 to 0. The highest performance level is six and the lowest performance level is zero.
BTT or Breakthrough Time is the time it takes a chemical to establish a permeation rate of one milligram per square meter per minute through the protective coating.