G-Tek® PolyKor®

Seamless Knit Single-Layer PolyKor®/ Acrylic Blend Glove with Double-Dip Latex MicroSurface Grip on Full Hand

41-8035

ansi-A5
ANSI Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42E

EN 388 2016 Results: 3X42EX
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

121

Protective Gloves Against Cold: 121
Convective Cold Resistance - 1
Contact Cold Resistance - 2
Water Permeability - 1

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Available Colors:

Salt & Pepper
  • SIZES: S-2XL
  • Packed: 6 Dozen/Case
  • STOCK TYPE: Stock
  • Country of Origin: China
Product Attributes

Liner Material: Acrylic / PolyKor

Acrylic: Acrylic gloves provide economical cold weather protection and excellent thermal insulation.
PolyKor: Products constructed with PolyKor® engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor® products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.

View All AcrylicView All PolyKor

Construction: Coated Seamless Knit

Coated Seamless Knit:

View All Coated Seamless Knit

Gauge: 10

Gauge: The number of rows of stitches per inch. A higher gauge means less bulk and greater dexterity.

View All 10 Gauge
Product Description

Product Description

Used in refrigerated areas, utilities, food processing, commercial fishing, construction, outdoor winter activities and recreation.

Features

  • Seamless construction for a comfortable fit
  • PolyKor® / Acrylic blended shell is lightweight and provides excellent dexterity, tactile sensitivity, cut resistance and economical cold weather protection
  • Latex MicroSurface coating provides a superior grip in dry and wet conditions by reacting like tiny suction cups that attach themselves firmly to the material being handled
  • Double-Dipped coating helps extend the life of the glove and provide excellent abrasion resistance
  • Flat latex undercoating helps keep hand dry in wet applications
  • Single-layer construction provides excellent thermal insulation and improved dexterity
  • Quickly evaporates moisture from the skin
  • Knit wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification

Related Product Downloads

  • Seamless Knit Glove
  • 10G Single-Layer PolyKor/Acrylic Blend
  • Salt & Pepper
  • Double Dip
  • Full Blue Latex w/ Black Latex Microsurface Grip
Standards Met

ANSI Cut Level: A5

ansi-A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

EN 388 2016 Results: 3X42EX

Abrasion: 3 Cut (Coupe Test): X Tear: 4 Puncture: 2 Cut (TDM-100 Test): E Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Cold: 121

en-511

Convective Cold Resistance - 1
Contact Cold Resistance - 2
Water Permeability - 1

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Request A Sample

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards, and test scores are readily available on each product’s webpage.

View Products
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL