LOGIN/ SIGN UP WHAT'S NEW Products Brands Industries Resources About Us Value Proposition PORTAL LOGIN
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety AccessoriesInsulating BlanketsInsulating Glove KitInsulating GlovesInsulating Sleeves
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue GoggleRescue Helmets
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsGo-To-Work KitsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionCartridgesDisposable MasksReusable Facepieces
Warning BeaconsEflare BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand Protection
WorkwearWork Apparel
promo-tile

Hand Protection

promo-tile

Specialized PPE for ELECTRIC VEHICLE MANUFACTURING

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

Addressing AR/FR Pain Points

promo-tile

Bouton® FogLess® 3Sixty™ Technology

promo-tile

UNRAVELING THE DYNAMICS OF ESD

promo-tile

G-Tek® D3O® Impact Glove Series

promo-tile

JSP Force Typhoon™ 8 Twin Filter Half Masks with PressToCheck™

promo-tile

PIP® Field Installable 4-Point Hard Hat Chin Strap Demo

promo-tile

BioSoft™ Sustainable Bio-Based Ear Plugs

promo-tile

PPE For Emergency Responders

promo-tile

ATA Fiber Technology Strength Meets Comfort

promo-tile

G-Tek® VRX™ ADVANCED PROTECTION

promo-tile

PPE For Emergency Responders

promo-tile

Heated Apparel For Cold Climates

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

Welding Garment Material Performance

promo-tile

Bisley X-Airflow™ Workwear Shirts

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

3 COMMON TYPES OF COLD STRESS And How You Can Prepare For Them

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

PROTECTIVE SLEEVE BUYERS GUIDE

promo-tile

MULTI-TASK WELDERS GLOVES Offer The Protection And Dexterity Welders Need

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

SURVIVIVNG THE SUMMER HEAT A Guide to Workplace Safety and Hydration

promo-tile

HALF MASK RESPIRATORS REVOLUTIONARY FORCE TYPHOON™8

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

4 HIDDEN JOBSITE RISKS And How To Avoid Them

promo-tile

Mips®HELMET SAFETY SYSTEM TECHNOLOGY

promo-tile

Bouton OpticalAdvanced Lens Technologies in Safety Eyewear™

promo-tile

What to Consider When Choosing HIGH VISIBILITY MULTI-SEASON WORKWEAR

promo-tile

6 Key Facts to Help Understand ARC FLASH RISKS

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

Head Protection

promo-tile

REUSABLE VS. DISPOSABLEUsing The Right Garment For The Right Job

promo-tile

Experience Barrier Protection and Flexibility With EXTENDED USE GLOVES

promo-tile

What is Double Hearing Protection And When Would You Need It?

promo-tile

CUSTOM LOGO SERVICES FAST, EASY & PRECISE

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

WELDING SAFETY SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

BisleyPREMIUM MULTI-SEASON WORKWEAR

promo-tile

Natural Disaster Relief PPE EXPECT THE UNEXPECTED

promo-tile

MADE-TO-ORDER SLEEVES Custom Options for Enhanced Performance

promo-tile

Enhancing Workplace Safety in the Construction Industry with MULTI-DIRECTIONAL HEAD PROTECTION TECHNOLOGY

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

THORZT™ RAPID REHYDRATIONFor the Industrial Athlete

promo-tile

Protective Clothing

promo-tile

BioSoft™ THE WORLD'S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

promo-tile

NOVAX ELECTRICAL SAFETYNot All Gloves Are Created Equal

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

CONTROLLED ENVIRONMENT SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

3SP ONLINE TRAINING

promo-tile

EYE PROTECTION SELECTOR GUIDE

promo-tile

HAND PROTECTION SELECTOR GUIDE

Cut Resistant Hand Protection

PIP® offers one of the widest ranges of coated seamless knit cut resistant gloves in the world, featuring leading brands like ATG®, G-Tek® and more. The use of cut resistant gloves has increased considerably over the years and we've led the charge with the introductions of innovative engineered yarn blends and grip technologies. Trust PIP® for every cut resistant glove need, no matter the spec, required feature, or budget.

HAND PROTECTION

Cut Resistant Gloves (129)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
CLEAR ALL
Country of Origin: United States
Country of Origin: Viet Nam
Polyurethane Grip w/ PolyKor Fiber

BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-530

  • Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A343
A343

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 3
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

4X43CX
EN 388 2016 Results: 4X43CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Grip with PolyKor Fiber

BEST SELLER

G-Tek® PolyKor®

Seamless Knit Polykor Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers, Touchscreen

715HNFR

  • Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case
  • Stock Type: Stock
A343
A343

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 3
Test Method: ASTM F1342

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X42CX
EN 388 2016 Results: 4X42CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
ECO Series CR Sustainable Fiber Gloves

G-Tek® ECO Series™

Seamless Knit Dyneema® Phoenix Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D324

  • Cut Level: A2
  • Liner Material: Dyneema Phoenix
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A233
A233

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 3
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

4X42BX
EN 388 2016 Results: 4X42BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ECO
Made from Bio-Based Materials

PIP® has collaborated with global partners like Dyneema® to develop bio-based ultra-high molecular weight polyethylene fiber delivers the same performance as conventional HPPE fibers, but with a lower carbon footprint. This innovative technique utilizes the mass balance approach and further reduces our reliance on fossil fuel-based resources.

Compare
Kevlar Gloves with PVC Grips

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with Double-Sided PVC Dot Grip - Medium Weight

08-K300PDD

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: PVC
  • Coating Coverage: Double-Sided
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Kevlar Gloves with PVC Grips

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with Double-Sided PVC Dot Grip - Heavy Weight

08-K350PDD

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: PVC
  • Coating Coverage: Double-Sided
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with Polyester Lining - Heavy Weight

07-KA700

  • Cut Level: A5
  • Liner Material: ACP/ Kevlar
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A52X
A52X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® / Cotton Plated Glove - Medium Weight

07-K320

  • Cut Level: A1
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A11X
A11X

Cut Level: A1
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Heavy Weight

07-K350

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Hide-Away™ / Aramid Blended Glove with Cotton/Polyester Plating - Heavy Weight

MATA500HA

  • Cut Level: A6
  • Liner Material: Aramid/ Stainless Steel Wire/ Cotton
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Machine Knit, Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A63X
A63X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Half-Finger

07-K259

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Half Finger
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Kevlar Gloves with PVC Grips

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with PVC Dot Grip - Light Weight

08-K200PD

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Weight: Lightweight
  • Coating: PVC
  • Coating Coverage: One Side
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Made to Order
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Uncoated Gloves made with Dyneema

Claw Cover®

Seamless Knit Dyneema® Glove - Heavy Weight

17-D350

  • Cut Level: A3
  • Liner Material: Dyneema
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Light Weight

07-K200

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Dyneema Diamond with Polyurethane

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D330

  • Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-3XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A44X
A44X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

4542DX
EN 388 2016 Results: 4542DX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar Gloves with PVC Grips

Kut Gard®

DuPont™ Kevlar® Blended Slabbers Glove with Extended Cuff and Double-Sided PVC Dot Grip

08-K385

  • Cut Level: A6
  • Liner Material: Kevlar/ Stainless Steel Wire
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: PVC
  • Coating Coverage: Double-Sided
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Extended Cuff
  • Sizes: M-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Made to Order
A6XX
A6XX

Cut Level: A6
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit Polykor Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

718HNFR

  • Cut Level: A2
  • Gauge: 18
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case
  • Stock Type: Stock
A252
A252

Cut Level: A2
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 5
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

4X41BX
EN 388 2016 Results: 4X41BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® / PBI® Blended Glove

07-KPBI200

  • Cut Level: A4
  • Liner Material: Kevlar/ PBI
  • Gauge: 13
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Dyneema Diamond with Polyurethane

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D325

  • Cut Level: A3
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A34X
A34X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

4541CX
EN 388 2016 Results: 4541CX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
ESD Cut Resistant Coated Knits

QRP® Qualakote®

ESD Safe Seamless Knit Cut Resistant Glove with Polyurethane Coated Palm & Fingers

CBH3ESDCR

  • Cut Level: A3
  • Liner Material: Carbon/ HPPE
  • Gauge: 15
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, ESD Safe
  • Sizes: XS-2XL
  • Packed: 120 Pair/Case
  • Stock Type: Stock
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ESD
ESD Safe

ESD is an acronym for electrostatic discharge. This discharge is the rapid transfer of static between two different objects. Although ESD doesn’t typically cause harm to the human body - you might only experience it as a small, surprising shock - it can cause extensive damage to electrical equipment and sensitive instruments. This damage may either be permanent, causing the device to malfunction (known as a catastrophic failure), or it may occur on a smaller scale that would be difficult to detect before the device is sent out for service (known as latent defect).

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove - Medium Weight

07-KA710

  • Cut Level: A4
  • Liner Material: ACP/ Kevlar
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Medium Weight

07-K300

  • Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with DuPont™ Kevlar® Lining - Medium Weight

07-KA720

  • Cut Level: A6
  • Liner Material: ACP/ Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A6XX
A6XX

Cut Level: A6
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Light Weight

22-750G

  • Cut Level: A5
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 24/Case
  • Stock Type: Stock
A5XX
A5XX

Cut Level: A5
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
ATA Fiber Technology with Cotton

Kut Gard®

Seamless Knit ATA® / Aramid Blended Glove - Heavy Weight

MATAKV/BKPL30

  • Cut Level: A5
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A52X
A52X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 4
Test Method: ASTM F1060-18
Temperature: 500°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended with Sta-COOL® Plating Glove - Medium Weight

10-C5GYCMX

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 204/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-C5GYCMX1, 10-C5GYCMX6
A73X
A73X

Cut Level: A7
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with Polyester Lining - Economy Weight

07-KA740

  • Cut Level: A4
  • Liner Material: ACP/ Kevlar
  • Gauge: 7
  • Weight: Economy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Kevlar Gloves with PVC Grips

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove with Double-Sided PVC Dot Grip - Light Weight

08-K200PDD

  • Cut Level: A2
  • Liner Material: Kevlar
  • Gauge: 13
  • Weight: Lightweight
  • Coating: PVC
  • Coating Coverage: Double-Sided
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Made to Order
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Composite Seamless Knit Gloves

NEW

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Antimicrobial Glove - Light Weight

G13CC/8YL

  • Cut Level: A8
  • Liner Material: Antimicrobial/ HPPE/ Lycra/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Antimicrobial, Low-Lint, Machine Knit, Seamless Knit
  • Sizes: XS-3XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A8XX
A8XX

Cut Level: A8
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Kevlar Gloves - Uncoated

Kut Gard®

DuPont™ Kevlar® Blended Slabbers Glove with Extended Cuff

07-K385

  • Cut Level: A6
  • Liner Material: Kevlar/ Stainless Steel Wire
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Extended Cuff
  • Size: L
  • Packed: 10 Dozen/Case
  • Stock Type: Made to Order
A6XX
A6XX

Cut Level: A6
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit Dyneema® Blended Antimicrobial Glove - Light Weight

22-750

  • Cut Level: A5
  • Liner Material: Antimicrobial/ Dyneema
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 24/Case
  • Stock Type: Stock
A5XX
A5XX

Cut Level: A5
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Dyneema Diamond with Polyurethane

G-Tek® ECO Series™

Seamless Knit Dyneema® Phoenix Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D326

  • Cut Level: A3
  • Liner Material: Dyneema Phoenix
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A353
A353

Cut Level: A3
Test Method: ASTM F2992-15

Puncture Level: 3
Test Method: ASTM F1342

Abrasion Level: 5
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 5
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

4X42CX
EN 388 2016 Results: 4X42CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ECO
Made from Bio-Based Materials

PIP® has collaborated with global partners like Dyneema® to develop bio-based ultra-high molecular weight polyethylene fiber delivers the same performance as conventional HPPE fibers, but with a lower carbon footprint. This innovative technique utilizes the mass balance approach and further reduces our reliance on fossil fuel-based resources.

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with Cotton Lining - Economy Weight

07-KA744

  • Cut Level: A3
  • Liner Material: ACP/ Kevlar
  • Gauge: 7
  • Weight: Economy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Uncoated Gloves made with Dyneema

Claw Cover®

Seamless Knit Dyneema® Glove - Light Weight

17-D200

  • Cut Level: A2
  • Liner Material: Dyneema
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XXS-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A22X
A22X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-121

  • Cut Level: A6
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-2XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A63X
A63X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with PVC Dot Grip - Lightweight

08-KAB750PD

  • Cut Level: A4
  • Liner Material: ACP/ Kevlar
  • Gauge: 13
  • Weight: Lightweight
  • Coating: PVC
  • Coating Coverage: One Side
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

P65
California Proposition 65
WARNING: Reproductive Harm - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ACP Kevlar Gloves

Kut Gard®

Seamless Knit ACP / DuPont™ Kevlar® Blended Glove with Cotton Lining - Medium Weight

07-KAH760

  • Cut Level: A4
  • Liner Material: ACP/ Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
SHOWING 1-36 OF 129 ITEMS
1 of 4
star What's New
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL