LOGIN/ SIGN UP WHAT'S NEW Products Brands Industries Resources About Us Value Proposition PORTAL LOGIN
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety AccessoriesInsulating BlanketsInsulating Glove KitInsulating GlovesInsulating Sleeves
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsGo-To-Work KitsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionCartridgesDisposable MasksReusable Facepieces
Warning BeaconsE-Flare BeaconFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel
promo-tile

THE BROADEST LINE OF TYPE II HEAD PROTECTION

promo-tile

The Importance of Providing Proper Fitting PPE For Women

promo-tile

Revolutionizing Safety with GORE-TEX Pyrad® for Unmatched Arc-Rated PPE Comfort

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

THE INDUSTRY'S MOST COMPREHENSIVE OFFERING OF COLD WEATHER PPE

promo-tile

60% MORE COVERAGE. 100% MORE CONFIDENCE. Bouton® Site Boss™ Safety Eyewear

promo-tile

Essential PPE for Contamination Control in High-Sensitivity Manufacturing Environments

promo-tile

G-Tek® Paradox™Ultra-Lightweight 21G Technology

promo-tile

JSP Force Typhoon™ 8 Twin Filter Half Masks with PressToCheck™

promo-tile

Caiman® Kontour™Comfortable Welding Gloves

promo-tile

ATA Fiber Technology Strength Meets Comfort

promo-tile

PUMA® SAFETY SHOESHIGH-PERFORMANCE SAFETY FOOTWEAR

promo-tile

BioSoft™ THE WORLD'S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

promo-tile

Bisley® X-Airflow™Breathable Safety Garments

promo-tile

Hand Protection

promo-tile

PPE For Emergency Responders

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

THORZT™ RAPID REHYDRATIONFor the Industrial Athlete

promo-tile

SAFETY IN A FLASHEflare™ Warning Beacons

promo-tile

G-Tek® VRX™ ADVANCED PROTECTION

promo-tile

DISASTER RELIEF PPEEssential Protection for Rescue and Recovery Teams

promo-tile

HALF MASK RESPIRATORS REVOLUTIONARY FORCE TYPHOON™8

promo-tile

HAND AND ARM PAIRING GUIDE

promo-tile

4 HIDDEN JOBSITE RISKS And How To Avoid Them

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

Understanding the Main Differences in Welding JacketsLeather vs. FR Cotton (Q&A)

promo-tile

BOSS® FOOTWEARAdvanced Protection & Comfort

promo-tile

How the New ANSI/ASSP Heat Stress Standard is Intensifying Workplace Safety

promo-tile

Kut Gard® ATA® PreventWear™ Cut Resistant Garments

promo-tile

ARC-RATED PYRAD FABRIC TECHNOLOGY BY GORE-TEX LABS

promo-tile

ECO Series™ Safety Eyewear Serious About Safety, Smart About Sustainability.

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

MAKE THE SWAPSustainable Hearing Protection that Doesn't Break the Bank

promo-tile

THE CUT PROTECTION EVOLUTIONWhy It’s Time to Upgrade to A4-A6 Gloves

promo-tile

Barrier Solutions for Clean and Efficient EV Battery Production

promo-tile

Head Protection

promo-tile

COMPARING ADVANCED HEAD PROTECTION SOLUTIONS

promo-tile

PPE For Emergency Responders

promo-tile

Heated Apparel For Cold Climates

promo-tile

THROUGH THE WRINGERHow Industrial Launderable Workwear Stands Up to Mining and Oil & Gas

promo-tile

G-TEK® POSIGRIP MAXLess Effort, More Control.

promo-tile

Bouton OpticalAdvanced Lens Technologies in Safety Eyewear™

promo-tile

PIP® WEAR TRIALS

promo-tile

vSeries™ Ear Muffs

promo-tile

WELDING SAFETY SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

BisleyPREMIUM EXTREME COLD WORKWEAR

promo-tile

Natural Disaster Relief PPE EXPECT THE UNEXPECTED

promo-tile

MADE-TO-ORDER SLEEVES Custom Options for Enhanced Performance

promo-tile

ADVANCED HEAD PROTECTION EQUIPMENTfor Safer Construction Sites

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

THORZT™Hydration Solutions Formulation

promo-tile

DISASTER RELIEF PPEEssential Protection for Rescue and Recovery Teams

promo-tile

NOVAX ELECTRICAL SAFETYNot All Gloves Are Created Equal

promo-tile

DISASTER RELIEF PPEEssential Protection for Rescue and Recovery Teams

promo-tile

CONTROLLED ENVIRONMENT SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

CUSTOM LOGO SERVICES FAST, EASY & PRECISE

promo-tile

THE HERITAGE LINEPUMA® SAFETY SHOES

promo-tile

Protective Clothing

Cut Resistant Hand Protection

PIP® offers one of the widest ranges of coated seamless knit cut resistant gloves in the world, featuring leading brands like ATG®, G-Tek® and more. The use of cut resistant gloves has increased considerably over the years and we've led the charge with the introductions of innovative engineered yarn blends and grip technologies. Trust PIP® for every cut resistant glove need, no matter the spec, required feature, or budget.

HAND PROTECTION

Cut Resistant Gloves (151)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
CLEAR ALL
Country of Origin: United States
Country of Origin: Sri Lanka
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE Blended Glove - Light Weight

13-111

  • Cut Level: A3
  • Liner Material: HPPE
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A32X
A32X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Hide-Away™ Blended Glove - Heavy Weight

MATA25HA

  • Cut Level: A3
  • Liner Material: ATA Fiber Technology/ Hide-Away/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-M
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A32X
A32X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology with Cotton

Kut Gard®

Seamless Knit ATA® / Aramid Blended Glove - Heavy Weight

MATW55PL-RT

  • Cut Level: A2
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Stock
A22X
A22X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology with Cotton

Kut Gard®

Seamless Knit ATA® / Cotton Blended Glove - Heavy Weight

MATPBK40GYPL-OERT

  • Cut Level: A4
  • Liner Material: ATA Fiber Technology/ Polyester/ Cotton
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology with Cotton

Kut Gard®

Seamless Knit ATA® / Aramid Blended Glove - Heavy Weight

MATATW40PL-OERT

  • Cut Level: A4
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology with Cotton

Kut Gard®

Seamless Knit ATA® / Aramid Blended Glove - Heavy Weight

MATAKV/BKPL30

  • Cut Level: A5
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A52X
A52X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 4
Test Method: ASTM F1060-18
Temperature: 500°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology

Kut Gard®

Seamless Knit ATA® Blended with Cotton Plating Glove - Heavy Weight

MATA30GYPL-3-RT

  • Cut Level: A4
  • Liner Material: ATA Fiber Technology/ Aramid/ Cotton
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology with Cotton

Kut Gard®

Seamless Knit ATA® / Aramid Blended Glove - Heavy Weight

MATA50OERTH

  • Cut Level: A5
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include MATA50OERTH-XS
A52X
A52X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 4
Test Method: ASTM F1060-18
Temperature: 500°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Blended with Cotton Plating Glove - Heavy Weight

MATA30PL

  • Cut Level: A4
  • Liner Material: ATA Fiber Technology/ Cotton
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include MATA30PL-XL, MATA30PL-XS, MATA30PL-XXL
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology

Kut Gard®

Seamless Knit ATA® / Nylon Blended Glove - Heavy Weight

MATA30BALGY-OERTC

  • Cut Level: A4
  • Liner Material: ATA Fiber Technology/ Aramid/ Nylon
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Stock
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Hide-Away™ / Elastane Blended Glove - Light Weight

M530

  • Cut Level: A3
  • Liner Material: ATA Fiber Technology/ Hide-Away/ Elastane
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® Hide-Away™ Blended Glove - Heavy Weight

M2988-OERTH

  • Cut Level: A5
  • Liner Material: ATA Fiber Technology/ Hide-Away/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A53X
A53X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology

Kut Gard®

Seamless Knit ATA® Blended Glove - Medium Weight

MATA10-GY

  • Cut Level: A3
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-L
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology

PIP®

Seamless Knit ATA® / Nylon Blended Glove - Light Weight

M1840

  • Cut Level: A3
  • Liner Material: ATA Fiber Technology/ Polyester/ Nylon
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A33X
A33X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
ATA Fiber Technology Nylon Plated

PIP®

Seamless Knit ATA® / Elastane Blended Glove - Light Weight

M500

  • Cut Level: A3
  • Liner Material: ATA Fiber Technology/ Aramid/ Elastane
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include M500-XS
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Light Weight

13-231

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A71X
A71X

Cut Level: A7
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Light Weight

13-221

  • Cut Level: A6
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A62X
A62X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Light Weight

13-131

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-2XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A72X
A72X

Cut Level: A7
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Light Weight

13-121

  • Cut Level: A6
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-2XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A62X
A62X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
ATA Hide-Away

Kut Gard®

Seamless Knit ATA® / Aramid Blended Glove - Heavy Weight

MATA38OERTH

  • Cut Level: A5
  • Liner Material: ATA Fiber Technology/ Aramid
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Made to Order
A52X
A52X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Polyurethane Grip w/ PolyKor Fiber

CLEARANCE

G-Tek® PosiGrip®

Seamless Knit Polykor Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

713HGBU

  • Cut Level: A1
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Country of Origin: Sri Lanka
  • Sizes: S-L
  • Packed: 10 Dozen/Case
  • Stock Type: Closeout, inventory is limited
A14X
A14X

Cut Level: A1
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

4343AX
EN 388 2016 Results: 4343AX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): A
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Kevlar Gloves - Uncoated

PIP®

Seamless Knit DuPont™ Kevlar® / Cotton Plated Glove - Medium Weight

35KE

  • Cut Level: A2
  • Liner Material: Cotton/ Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Size: L
  • Packed: 24 Dozen/Case
  • Stock Type: Stock
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Cut Protection in Oily Environments

MaxiCut® Oil

Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers

44-304

  • Cut Level: A2
  • Liner Material: Engineered Yarn
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A24X
A24X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4341BX
EN 388 2016 Results: 4341BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Cut Protection in Oily Environments

MaxiCut® Oil

Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles

44-305

  • Cut Level: A2
  • Liner Material: Engineered Yarn
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A24X
A24X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4341BX
EN 388 2016 Results: 4341BX
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Cut Protection in Oily Environments

MaxiCut® Oil

Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers

44-504

  • Cut Level: A3
  • Liner Material: Engineered Yarn
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A34X
A34X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4442CX
EN 388 2016 Results: 4442CX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Cut Protection in Oily Environments

MaxiCut® Oil

Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles

44-505

  • Cut Level: A3
  • Liner Material: Engineered Yarn
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm, Fingers & Knuckles
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A34X
A34X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 4
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4442CX
EN 388 2016 Results: 4442CX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Hi-Performance Nitrile by ATG

MaxiFlex® Cut™

MaxiFlex® Cut™ Seamless Knit DuPont™ Kevlar® Glove with Black MicroFoam Nitrile Coating - Palm & Fingertips - Touchscreen Compatible

34-1743

  • Cut Level: A4
  • Liner Material: Kevlar/ Polyester/ Nylon
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible, Reinforced Thumb Crotch
  • Country of Origin: Sri Lanka
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

4331D
EN 388 2016 Results: 4331D
Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

X1XXXX
Protective Gloves Against Thermal Hazards: X1XXXX
Resistance to Flammability - X
Contact Heat Resistance - 1
Convective Heat Resistance - X
Radiant Heat Resistance - X
Resistance to Small Splashes of Molten Metal - X
Resistance to Large Splashes of Molten Metal - X

EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.

Compare
100% Aramid

Kut Gard®

Seamless Knit Aramid Glove - Light Weight

M13K

  • Cut Level: A2
  • Liner Material: Aramid
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: XS-XL
  • Packed: 24 Dozen/Case
  • Stock Type: Made to Order
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Aramid Cotton Plated

Kut Gard®

Seamless Knit Aramid with Cotton Plating Glove - Light Weight

M13TWPL

  • Cut Level: A2
  • Liner Material: Aramid/ Cotton
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-L
  • Packed: 24 Dozen/Case
  • Stock Type: Made to Order
A21X
A21X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended with Sta-COOL® Plating Glove - Medium Weight

10-C5GYCMX

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-C5GYCMX1, 10-C5GYCMX6
A73X
A73X

Cut Level: A7
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-C6WHEC

  • Cut Level: A8
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A82X
A82X

Cut Level: A8
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-C6GYEC

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A72X
A72X

Cut Level: A7
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-C6GY

  • Cut Level: A8
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-2XL
  • Packed: 24/Case
  • Stock Type: Made to Order
A82X
A82X

Cut Level: A8
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A8
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended with Sta-COOL® Plating Glove - Medium Weight

10-C5HVOCMX

  • Cut Level: A7
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-3XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A73X
A73X

Cut Level: A7
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A7
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Composite Seamless Knit Gloves

Claw Cover®

Seamless Knit HPPE / Stainless Steel Blended Glove - Medium Weight

10-121

  • Cut Level: A6
  • Liner Material: HPPE/ Stainless Steel Wire
  • Gauge: 10
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-2XL
  • Packed: 204/Case
  • Stock Type: Made to Order
A63X
A63X

Cut Level: A6
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Aramid Cotton Plated

Kut Gard®

Seamless Knit Aramid / Cotton Blended Glove - Heavy Weight

MATW55PL

  • Cut Level: A2
  • Liner Material: ATA Fiber Technology/ Aramid/ Cotton
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Country of Origin: United States
  • Sizes: S-XL
  • Packed: 12 Dozen/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include MATW55PL-XS
A22X
A22X

Cut Level: A2
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Custom Logo

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Compare
SHOWING 1-36 OF 151 ITEMS
1 of 5
star What's New
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL